Checking Remaining Toner And Paper - Kyocera KM-2560 Operation Manual

Checking Remaining Toner and Paper

OPERATION GUIDE
Follow the steps below to check remaining toner and paper on the touch
panel.
NOTE:
Paper size and media type loaded in each paper source can also
be checked.
1
Press the Status/Job Cancel key.
2
Press [Paper/
Supplies].
3
Check the remaining toner of Toner Information and the remaining paper
of each paper source of Paper.
NOTE:
Remaining toner level is indicated at one of 11 levels between
100% and 0%. The smaller the number, the smaller the amount of
remaining toner.
Paper remaining in the Multi Purpose Tray is indicated either as 100% or
0%.
Detail
Toner Information Paper
Toner Status Size
Black(K) Ledger
% Plain
Ledger
Waste Toner OK
Plain
Letter
Plain
Letter
Plain
Letter Plain
Printing Jobs Sending Jobs Storing Jobs
Status
Basic Operation
Others
Type Status Type Status
30% Staple A OK
30%
30%
30%
0%
Device/
Paper /Supplies
Communication
10/10/2007 10 :10
3-63
3