Listening To The Radio - JVC HX-D7C Instructions Manual

To save the power consumption while on
standby—Eco mode
While on standby...
Canceled
The display illumination (including the display
demonstration) disappears.

Listening to the Radio

To select the band (FM/AM)
FM
AM
To tune in to a station
While FM or AM is selected...
1 sec.
Increases the frequency.
Decreases the frequency.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
(holding then...)
To restore the stereo effect, press the button again (the
MONO indicator goes off).
11
Main Unit
ONLY
ECO
INFO
Remote
ONLY
The MONO indicator
lights on the display.
Reception will improve
though stereo effect is
lost—monaural
reception mode.
Remote
To preset stations
ONLY
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset, then enter into
the presetting mode.
(holding then...)
2
Select a preset number for the station you store.
3
Store the station.
(holding then...)
To tune in to a preset station
1
Select the band (FM or AM).
FM
AM
2
Select a preset number for the station you store.
• You can also use ¢/4 on the remote control or the
PRESET +/– control on the main unit.
Examples:
To select preset number 5,
press 5.
To select preset number
15, press +10, then 5.
To select preset number
30, press +10, +10, then
10.