Optical Digital Output Signals - JVC HX-D7C Instructions Manual

The disc sound is discontinuous.
] The disc is scratched or dirty.
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs are programmed to always display no
subtitle initially. If this happens, press SUBTITLE after
starting play (see page 21).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs are programmed to always use the original
language initially. If this happens, press AUDIO after
starting play (see page 20).
The disc tray does not open or close.
] The AC power cord is not plugged in.
] Child Lock is in use (see page 25).
]
Program Play is in use. Exit from Program Play
page 24).
If you still have a problem, reset the System.
While in standby...

OPTICAL DIGITAL OUTPUT Signals

DIGITAL AUDIO
OUTPUT
Playback disc
DVD VIDEO
with 48 kHz, 16/20/24 bit
Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS Digital Surround
2
DVD AUDIO*
with 48/96/192 kHz, 16/20/24
bit Linear PCM
with 44.1/88.2/176.4 kHz, 16/
20/24 bit Linear PCM
with Dolby Digital
with DTS Digital Surround
SVCD, VCD, CD
CD with DTS Digital Surround
MP3 disc
1
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
DIGITAL OUTPUT (OPTICAL) terminal if the discs are not copy-protected.
2
* There is no output for DVD Audio with content protection set.
41
USB Operations:
Unable to play back through the USB connection.
]
USB connection and setting is incorrect (see page 14).
The sound through the USB connection stops.
]
Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
• Disconnect and connect the USB cable again
• Restart the music software on your PC
• Turn off and on the system
Timer operations:
Daily Timer does not work.
] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
(see
Main Unit
ONLY
Press and hold until the display flashes.
The factory default settings are restored and all the settings you have made are
erased.
STREAM/PCM DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
DTS bitstream
48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
Dolby Digital bitstream
DTS bitstream
44.1 kHz, 16 bit Linear PCM*/48 kHz, 16 bit Linear PCM*
DTS bitstream
32/44.1/48 kHz, 16 bit Linear PCM
Output Signals
1
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
PCM ONLY