JVC DR-MV1 Instructions Manual page 76

SUBSIDIARY SETTINGS
76
EN
8 VIDEO STABILIZER — ON / OFF
When this function is set to "ON", you can automatically correct
vertical vibration in the picture when playing back unstable
recordings made on another recorder.
NOTES:
● When you finish viewing a tape, be sure to set this function to "OFF".
● Regardless of the setting, this function has no effect during recording
and during special effects playback.
● The on-screen display may jitter vertically when this function is set to
"ON".
● To watch recordings with close-caption, set this function to "OFF".
8 BLUE BACK — ON / OFF
When this function is set to "ON", the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to "OFF".
8 2ND AUDIO RECORD — ON / OFF
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on L/R
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.
When this function is set to "OFF", the SAP audio cannot be
recorded.
NOTE:
When the channel is changed on the unit;
● The "STEREO" indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
● Both "STEREO" and "SAP" indicators appear when a stereo program
is accompanied by SAP sound.