JVC DR-MV1 Instructions Manual page 84

TROUBLESHOOTING
84
EN
Initializing (DVD Deck Only)
Malfunction occurs on the unit.
]Press 1 to turn off the unit, press and hold 1, then press 8
for two seconds or more.
Other Problems
The image of the TV broadcast appears distorted on the TV
screen.
For RF/AV/S-VIDEO connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (
For component video connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (
Whistling or howling is heard from the TV during camcorder
recording.
The camcorder's microphone is too close to the TV.
]Position the camcorder so its microphone is away from the TV.
The TV's volume is too high.
]Turn the TV's volume down.
When scanning channels, some of them are skipped over.
Those channels have been designated to be skipped.
]If you need the skipped channels, restore them. (
The channel cannot be changed.
Recording or Live Memory recording* is in progress.
]Press 9 to pause the recording, change channels, then press 4
to resume recording.
* DVD deck only
Channel settings that were made manually seem to have
changed or disappeared.
After the manual settings were made, Auto Channel Set was
performed.
]Perform "Manual Clock Set" (
Even though Auto or Semiauto Clock Set has been performed,
the clock is incorrect.
The clock setting data received from the host channel is
incorrect.
]Select a different host channel during "Semiauto Clock Set"
( pg. 20), or perform "Manual Clock Set" (
) lights off on the front display panel.
) lights up on the front display panel.
pg. 21)
pg. 20).
pg. 20).
On-screen Message (DVD Deck Only)
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
The memory is full for registration for the Navigation system. The
recording cannot be started even though the capacity for the
recording is enough. (
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE
TO REGISTER INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
( pg. 60)
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
A disc that is not registered in the library has been inserted.
Register the disc as necessary. (
INSERT DISC #XXXX
Appears when a title that has been selected in the library is not
contained in the loaded disc.
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
Recording and/or editing cannot be performed with a loaded
DVD-RAM disc.
The number of titles exceeds 99.
The number of play lists exceeds 999.
SET CLOCK BEFORE TIMER PROGRAMING
To set the timer program, the clock must be set in advance.
( pg. 20)
PROGRAM FULL
DELETE UNWANTED TIMER PROGRAM
You can program this unit to timer-record as many as 8
programs. To program more, you need to cancel a timer program
already set. ( pg. 45)
CAN NOT SET DISC TIMER PROGRAMING WITH THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED BELOW
DVD-RAM
DVD-RW (VR MODE)
On-Disc Timer Programing has been attempted when a disc that
is not compatible with the function is loaded. (
NO DISC INSERTED
On-Disc Timer Programing has been attempted when a disc is
not loaded, or loaded upside down. (
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
When a playback-only disc or a finalized disc is loaded, 7 has
been pressed. ( pg. 8)
pg. 60)
pg. 60)
pg. 43)
pg. 11, 43)