Time Code And User's Bit; Displaying Time Code And User's Bit; Time Code Operation Mode - JVC GY-HM750CHU Instructions Manual

Shooting

Time Code and User's Bit

Time code and user's bit data are recorded with the video in
this camera recorder.
The time code and user's bit are displayed on the viewfinder
and LCD screens during playback or recording. (Status
screen)

Displaying Time Code and User's Bit

The time code and user's bit are displayed on the viewfinder
and LCD screens during playback or recording.
The display differs according to the menu settings.
1
Set [Main Menu] B [LCD/VF] B [Status Display] B [TC/
UB] to On . (A Page 91)
Time code or user's bit data is displayed on the status
screen.
1280x720 30/24 fps
24p HQ
A
100min
B 100min
STBY
282min F5.6
STATUS 1 Screen
2
Select the display with the [TC DISPLAY] switch on
the LCD monitor.
Select time code display (TC) or user's bit display (UB).
[TC DISPLAY]
Setting Switch
[TC GENE.] Setting Switch
Time Code or User's Bit
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
AE+1 9dB 1/10000
Memo :
● Time code display for [IEEE1394] input is not supported.
● Values recorded on the SDHC card is displayed in Media
mode.
Setting Display LCD/VF Display
TC Time When [Main Menu] B [LCD/
Code VF] B [Status Display] B
[TC/UB] is set to On , time
UB User's
code or user's bit is
Bit
displayed during the
following status display and
information display mode of
the LCD screen.
STATUS 1 screen in
Camera mode
STATUS 1, STATUS 2
screens in Media mode (SD)

Time Code Operation Mode

Three types of time code operation can be selected with the
[TC GENE.] switch. They are FREE , REC , and
REGEN .
Setting Mode
FREE FreeRun The time code operates in the run mode at all
mode times regardless of the recording status.
It continues to run even when the power of the
camera recorder is turned off. *
REC RecRun The time code operates in the run mode during
mode recording. It continues to run in the order of the
recorded clips as long as the SDHC card is not
replaced. If the SDHC card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
REGEN Regen The time code operates in the run mode during
mode recording. When the SDHC card is replaced,
the last time code recorded on the card is read
and recorded on a new card so that the time
code continues in running order. (A Page 52)
* When [Rec Mode] in the [Record Set] menu is set to
Variable Frame , time code operation enters RecRun
mode.
VIDEO Output
Display
When [Analog
Out Char.] or [SDI
Out Char.] in the
[A/V Out] menu is
set to On , time
code or user's bit
is displayed in the
respective video
output images
during the LCD/
VF display setting
on the left.
Description