JVC GY-HM750CHU Instructions Manual page 107

Item
H
ND Filter Position
I
Remaining Space on
External Device
J
Operation of External
Device
K
Time Code (TC)/
User's Bit (UB)
Displays the current ND filter position.
No display : [ND FILTER] is set to OFF
ND1/4 : [ND FILTER] is set to 1/4
ND1/16 : [ND FILTER] is set to 1/16
Memo :
● You can turn ON/OFF the display using [Filter] of [Status Display] in the [LCD/VF] menu.
(A Page 90)
Displays the remaining recording time of the external device (0 to 999). When the remaining time is running out,
this is indicated in red (value + unit of measurement) as a warning to the user.
Memo :
● Only warnings are displayed in the STATUS 0 and STATUS 4 screens.
Displays the operating status of the connected external device. For details, refer to the instruction manual of the
corresponding external device.
Memo :
● Only warnings are displayed in the STATUS 0 and STATUS 4 screens.
Displays the time code (hour: minute: second: frame) or user's bit data.
Example:Time Code:
0 0 : 0 0 : 0 0 : 0 0
User's Bit:
FF EE D D 2 0
Memo :
● You can turn ON/OFF the display using [TC/UB] of [Status Display] in the [LCD/VF] menu.
(A Page 91)
● You can select whether to display the time code or user's bit using the [TC DISPLAY] switch on the inner
panel of the LCD monitor.
Description
Colon (:) for non-drop frames
Dot (.) for drop frames