Warning Indications; Battery Indicator - JVC Everio GZ-HD7 Instructions Manual

Hd hard disk camcorder
Hide thumbs Also See for Everio GZ-HD7:
Table of Contents

Advertisement

Warning Indications

Indication

(Battery indicator)

SET DATE/TIME!
LENS COVER
HDD ERROR!
MEMORY CARD
ERROR!
CHECK CARD'S WRITE
PROTECTION SWITCH
VIDEO MANAGEMENT
FILE IS BROKEN. TO
RECORD/PLAYBACK
VIDEO, RECOVERY IS
REQUIRED. RECOVER?
CAN NOT READ EVENT
INFORMATION
RECORDING FAILURE
INCOMPATIBLE USB
DEVICE

Displays the remaining battery power.
High
As the battery power comes close to nil, the battery
indicator blinks. When the battery power is exhausted,
power turns off automatically.
Appears when the date/time is not set.
The built-in clock's rechargeable lithium battery is
discharged, so the previously set date/time is erased.
Connect the camera to an AC outlet using the AC adapter
for over 24 hours to charge the clock's lithium battery. Then
set the date/time.
Appears for 5 seconds after power is turned on in recording
mode if the lens cover is closed or when it is dark.
Remove the card once and insert it again. At this time,
switch the camera's power on after inserting the SD card. If
the error is not cancelled, replace the card with one that has
been guaranteed for correct operation.
Perform clean up to restore the capacity of the recording media.
Appears when you attempt recording when the write/erase
protection tab on the SD card is set to the "LOCK" position.
The video management file is broken. Recovery is required
to record or play back video files. Move the set lever to ¡ /
¢ to select [YES], then press down to recover the video
management file.
Appears when the event information cannot be read.
The writing speed of recording medium is slow, or the
recording medium is corrupted. Use an SD card that is
guaranteed to operate.
The recording medium was subjected to vibrations or jolts.
Be careful not to subject the recording medium to vibrations
or jolts.
Appears when the recording medium is full and recording
is not possible. Delete unnecessary files, or replace the SD
card.
Appears when an incompatible USB device is connected to
the camera.
Appears when a DVD burner that is switched off is
connected. If you want to use the DVD burner, switch the
power on.
Meaning/Action
Exhausted
Z
17
16
19
72
38
19
38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everio gz-hd7u

Table of Contents