5
Click [Continue].
6
Click [Install].
The software installation starts.
7
Click [Close].
Connecting the Camera to the PC
Preparation:
Set the camera's power/mode switch to OFF.
USB Connector
USB Cable
USB Connector
NOTES
•
When the USB cable is connected, turning
on or off the camera causes malfunctions of
the PC.
•
Connect the camera directly to the PC, not
through the hub.
•
Do not use an extension USB cable.
•
Saving the wrong kinds of files in a
recording medium or deleting files or
folders from a recording medium can cause
problems with the operation of the camera.
When it is necessary to delete a file from
a recording medium, delete it through the
camera. Also, do not move or rename
folders and files in the medium on PC.
•
Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
Continued on next page
DC Connector
AC Adapter
To AC Outlet