To Extract A Still Image File From A Video File; Dpof Print Setting - JVC Everio GZ-HD7 Instructions Manual

Managing Files (Continued)
To Extract a Still Image File From a
Video File –
You can extract the desired scene from a
recorded video file, and record it as a still
image file.
Preparation:
•
Slide the power/mode switch to MODE to
!
select mode.
•
Press the PLAY/REC button to select
playback mode.
1
Select the desired video file.
Select
Set
Playback starts. Search the desired scene.
2
SNAP
SHOT
NOTES
•
Extracted still images are stored at a
resolution of 1920 x 1080. The image can
be elongated in the horizontal or vertical
directions depending on the picture quality
of the source video file.
•
Images cannot be extracted when the video
file is in search or slow-motion playback.
Extract images when the video is in normal
playback, or when it is paused.
•
The continuous shooting function (Z pg. 69)
cannot be used to extract images.

!
mode only
VIDEO
SELECT SET
DPOF Print Setting – # mode only
The number of prints to make of a still image
recorded on an SD card can be set. This
feature is useful when taking the SD card to a
photo lab for printing.
Preparation:
•
Slide the power/mode switch to MODE to
select
•
Press the PLAY/REC button to select
playback mode.
•
Set [REC MEDIA FOR IMAGE] to [SD].
(Z pg. 69)
1
8/8
SORT
2
Select [DPOF].
Setting Files Individually
After performing steps 1-2
3
Select [SELECT IMAGES].
#
mode.
FUNCTION
Select
Set
SELECT
Select
DPOF TOTAL:
Set
SELECT
DELETE
PROTECT
COPY
MOVE
EFFECT
DPOF
DPOF
SELECT IMAGES
ALL 1
CHECK SETTINGS
RESET
SET QUIT
0
8/8
SET QUIT