Table of Contents
Advertisement
Chapter 13— Configuration/Control Commands
Device Parameters
126
device.friendly_name
Type: getvar; setvar
This parameter refers to the device's friendly name. The printer reports its
serial number as its friendly name if a name has not been assigned to it yet.
getvar result
Returns the friendly name assigned to the printer.
Example
Description
Syntax
Result
setvar choices
A string of up to 16 characters enclosed in double quotes. Default =
Printer's serial number enclosed in double quotes.
Example
Description
Syntax
Result
device.reset
Type: do
Instructs the printer to perform a soft reset.
do parameters
None
Example
Description
Syntax
Result
device.restore_defaults
Type: do
Instructs the printer to restore factory default values for the specified
category of parameters.
do parameters
Printer parameter category: wlan, ip, display, or power.
Example
Description
Syntax
Result
EasyCoder PL-Series Printer Programmer's Reference Manual
Retrieve the current friendly name of the printer.
! U1 getvar "device.friendly_name"
Printer responds with the current friendly name, such
as XXQT02-02-0555.
Assign "station 2" to the printer as its friendly name.
! U1 setvar "device.friendly_name"
"station 2"
Printer assigns "station 2" as its friendly name.
Perform a soft reset.
! U1 do "device.reset"
Printer performs a soft reset.
Restore the network card's WLAN parameters to
their default values.
! U1 do "device.restore_defaults"
"wlan"
Printer restores WLAN parameters to their factory
default values (eSSID = 247, etc.).
Advertisement
Table of Contents
