Specifications - Datamax S-Class ST-3210 Operator's Manual

6.0 Specifications

Communications
Character Set:
Parallel Interface Port:
Serial Interface Port:
Baud Rates:
Word Length and Parity:
Handshaking:
Input Buffer:
Control (Front) Panel
Indicators:
Buttons:
Potentiometer:
Electrical
Input Voltage,
Configurable:
Circuit Protection:
Grounding:
ST/SV-3210 and ST/SV-3306
Specifications
ANSI ASCII
Centronics type 36-pin
RS-232c and RS-422; DB25
600, 1200, 2400, 4800, 9600, 19.2K and 38.4K
Selectable data format:
7-bit word with even parity, or
8-bit word with no parity
Xon/Xoff and CTS & DTR.
Serial: Approximately 6 Kbytes. XOFF is
transmitted and DTR goes low with 750 bytes
available in the buffer. XON is transmitted and
DTR goes high when 1000 bytes remain in the
buffer. Characters are transmitted without
parity from the printer.
Parallel: 1KBytes.
Power, Fault and On-Line.
Dual Purpose: Pause/F1; Feed/F2; and Test/F3
0-20 darkness settings
105 125 VAC, or
210 250 VAC; 47-63 Hz.
115 VAC: 1.6A Time Delay Fuse.
230 VAC: 0.8A Time Delay Fuse.
Unit must be connected to a properly grounded
receptacle.
43