Vcr Connection - Haier P42V6-A8K Owner's Manual

External Equipment Connections
NOTE: All cables shown are not included with the TV.
Choose Your Connection
There are several ways to connect your television, depending on the
components you want to connect and the quality of the signal you want to
achieve. The following are examples of some ways to connect your TV.
Choose the connection which is best for you.

VCR connection

- To avoid picture noise (interference), leave an adequate distance between the VCR
And TV.
1.
Connect the audio and video cables
from the VCR's output jacks to the TV`s
input jacks, as shown in the figure.
When connecting the TV to VCR,
match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red).
If you connect an S-VIDEO output from VCR
to the S-VIDEO input, the picture quality is
improved; compared to connecting a
regular VCR to the Video input.
2.
Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the VCR
owner`s manual.)
3
. Select the input source
by the TV/AV button
on the remote control.
Do not connect to both Video and S-Video at the same time. In the event
that you connect both Video and the S-Video cables, only the S-Video will
work. So you should not connect to S-Video if you want to use Video.
L R
V
VIDEO IN AUDIO IN
S-VIDEO
IN
S-VIDEO
L R
AUDIO IN
9