Table of Contents
Advertisement
Remote controller
Inserting Batteries
1
.Slide open the cover
of the battery
compartment on the
back of the remote
controller.
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller away from heat
source or humid area to ensure effective
performance of the remote controller.
4
2.
Load two AA alkaline batteries
in the compartment.
attention to the polarity diagram
in the battery compartment.
and minus poles to respective
mark)
Make sure that two AA alkaline batteries are
loaded. The batteries must be of the same
type. The batteries must be located properly.
The batteries are not rechargeable.
Make sure that there is no obstacle between the
remote controller and television set.
3
.Replace the cover of the
paying
battery compartment.
(plus
Advertisement
Table of Contents
