Choose Your Connection; Vcr Connection - Haier P37K1 Owner's Manual

External Equipment Connections
NOTE: All cables shown are not included with the TV.

Choose Your Connection

There are several ways to connect your television, depending on the components you
want to connect and the quality of the signal you want to achieve. The following are
examples of some ways to connect your TV.
Choose the connection which is best for you.

VCR Connection

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.
Connection Option 2
1
. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as
shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red).
If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is
improved; compared to connecting a regular VCR to the Video input.
2
. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner`s
manual.)
3
. Select the input source with using the INPUT button on the remote control, and then press
CH+/- button to select the source, press the VOL+ button to confirm.
9
HDMI
PC IN
PC
AUDIO IN
ANT.
COMPONENT IN
AUDIO
Y Pb/Cb Pr/Cr
L
VEDIO L R
AV OUT
S-VEDIO
AV IN
R