Displaying The Current Memory Configuration; Memory Information Sample - HP Vizualize,Visualize b2000 Supplementary Manual

Boot Console Handler

Displaying the Current Memory Configuration

Displaying the Current Memory Configuration
The following sample screen output uses the memory command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for the system, from the Information Menu of
the Boot Console Handler, follow the directions in "Accessing the Boot Console Handler"
earlier in this chapter. Once you are in the Boot Console Handler Main Menu, type the
following at the prompt and press
Main Menu: Enter command> information
This places you in the Information Menu. From here, type the following at the prompt and
press :
Enter
Information Menu: Enter command> memory
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. See the section "Memory Information Sample."

Memory Information Sample

The following example shows the memory information when memory modules are properly
installed and configured:
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size
---- ------
0 256MB
1 256MB
2 128MB
TOTAL MEMORY = 640MB
MEMORY FAULT TABLE
Slot Size
---- ------
Active, Installed Memory
Deallocated Pages
Available Memory
Good Memory Required by OS
Memory
HVERSION
-------- ----------
0x0860
156
:
Enter
Status
-------------
Active
Active
Active
Status
-------------
SVERSION
0x0900
: 640MB of SDRAM
: 0 Pages
-----------
: 640MB
: 0 (Not Initialized)
Chapter 6