2Type 2 Battery Holder - HP Evo D500 Reference Manual
Service reference guide business desktop
Hide thumbs
Also See for Evo D500:
- Support list (34 pages) ,
- Supplementary manual (20 pages) ,
- Support telephone numbers (19 pages)
Table of Contents
Advertisement
6.15.2 Type 2 Battery Holder
1. To release the battery from its holder, squeeze the metal clamp 1 that extends above one
edge of the battery. When the battery pops up, lift it out.
2. To insert the new battery, slide one edge of the replacement battery under the holder's lip
with the positive side up 2. Push the other edge down until the clamp snaps over the other
edge of the battery.
✎
After the battery has been replaced, use the following steps to complete this procedure.
3. Replace the computer access panel.
4. Plug in the computer and turn on power to the computer.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Service Reference Guide, d500
Removal and Replacement Procedures— Convertible Minitower (CMT) Chassis
336492-005
6–29
Advertisement
Table of Contents
