Removing Or Inserting A Memory Board - HP Compaq NC6140 Hardware Manual

Removing or Inserting a Memory Board

Å
WARNING: To prevent exposure to electrical shock, work only in
the memory compartment during this procedure. The hard drive
bay and the memory and mini PCI compartments are the only
user-accessible internal compartments on the notebook. All other
areas that require a tool to access should be opened only by a
Compaq authorized service provider.
Å
WARNING: To prevent exposure to electrical shock and damage to
the notebook, shut down the notebook, unplug the power cord, and
remove the battery pack before installing a memory board.
Ä
CAUTION: To prevent electrostatic discharge from damaging
electronic components: Before beginning this procedure, discharge
yourself of static electricity by touching a grounded metal object.
For more information about preventing electrostatic damage, see
the Regulatory and Safety Notices guide on this CD.
1. Be sure that you have followed the instructions in the
preceding warnings and caution. (If you are not sure whether
the notebook is off or in Hibernation, briefly press the power
button. If your work returns to the screen, save your work,
exit all applications, then shut down the notebook.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack.
Hardware Guide
Hardware Upgrades
7–5