Using A Usb Device; Enabling Usb Legacy Support - HP Compaq NC6140 Hardware Manual

Using a USB Device

USB devices function in the system the same as comparable
non-USB devices, with 1 exception: By default, USB devices do
not function unless an operating system that supports USB is
loaded. Windows XP Home and Windows XP Professional
support USB.
To use a USB keyboard or hub connected to a USB connector on
the notebook during startup (before Windows loads) or in a
non-Windows application or utility (such as Computer Setup),
enable USB legacy support.

Enabling USB Legacy Support

USB legacy support is set in Computer Setup. Computer Setup is
a non-Windows utility. For more information about using
Computer Setup, see the Software Guide, Chapter 4, "Setup
Utilities and Diagnostics," on this CD.
1. To open Computer Setup, turn on or restart the notebook,
then press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Device
Options.
3. Use the arrow keys to select Enable USB legacy support.
4. To save your preference and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preference is set as you exit Computer Setup and is in
effect when the notebook restarts.
Hardware Guide
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
External Device Connections
F2.
F1.
6–3