Preparing The Notebook For Disassembly - HP Compaq NC4010 Maintenance And Service Manual

5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in Hibernation, turn the computer on and
then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack.
Battery pack, 6-cell, 40-wH
Maintenance and Service Guide
Battery Pack
Spare Part Number Information
Removal and Replacement Procedures
315338-001
5–5