Preparing The Notebook For Disassembly - HP Pavilion dv1000 Maintenance And Service Manual

5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
Battery packs
12-cell, 8.8-AHr
6-cell, 4.4-AHr
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the front panel
b. Slide and hold the battery release latch 1 to the left. (The
c. Lift the front edge of the battery pack up and swing it
d. Remove the battery pack.
Maintenance and Service Guide
Spare Part Number Information
toward you.
front edge of the battery pack disengages from the
notebook.)
back 2.
Removal and Replacement Procedures
367760-001
367759-001
5–5