Table of Contents
Advertisement
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figure 8)
A. Tool Box ..................................................... 1
B. Oil Can ....................................................... 1
C. Standard Screwdriver
D. Standard Screwdriver
E. Wrench 17/19mm ........................................ 1
F.
Hex Wrench Set 1.5–10mm ....................... 1
G. Vertical Elevation Crank ............................. 1
H. Fine Downfeed Handwheel ........................ 1
I.
Drawbar
⁄
"-20 x 18" (not shown) ............. 1
7
16
A
H
F
Figure 8. Model G9901/G9902/G9903 inventory.
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
Model G9901/G9902/G9903 Milling Machine
Qty
⁄
" Blade ................. 1
3
8
⁄
" Blade ................. 1
1
4
B
C
D
G
E
Clean Up
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
citrus-based degreaser such as Grizzly's G7895
Citrus Degreaser. To clean thoroughly, some parts
must be removed. For optimum performance
from your machine, clean all moving parts or
sliding contact surfaces. Avoid chlorine-based
solvents, such as acetone or brake parts cleaner
that may damage painted surfaces. Always follow
the manufacturer's instructions when using any
type of cleaning product.
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery.
NOT use these products
to clean the machinery.
Many cleaning solvents
are
Minimize your risk by only
using these products in a
well ventilated area.
G7895—Grizzly Citrus Degreaser
This natural, citrus-based degreaser is a great
solution for removing export grease, and it's much
safer to work around than nasty solvents.
Figure 9. Grizzly citrus degreaser.
DO
toxic
if
inhaled.
-21-
Advertisement
Table of Contents
