Section 6: Maintenance; Cleaning/Lubricating - Grizzly G0456 Owner's Manual

Variable speed wood lathe

Hide thumbs Also See for G0456:

Table of Contents

SECTION 6: MAINTENANCE

Always disconnect power

to the machine before

performing maintenance.

Failure to do this may

result in serious person-

al injury.

G0456 Variable Speed Wood Lathe

Cleaning the Model G0456 is relatively easy.

Vacuum excess wood chips and sawdust, and

wipe off the remaining dust with a dry cloth. If any

resin has built up, use a resin dissolving cleaner

to remove it. Treat all unpainted cast iron and

steel with a non-staining lubricant after cleaning.

Lubricate the unpainted cast iron surfaces on the

bed by wiping the table clean after every use—

this ensures moisture from wood dust does not

remain on bare metal surfaces. We recommend

using products such as G96

SLIPIT

, or Boeshield

unpainted cast iron on your machine.

Gun Treatment,

T-9 for lubricating the

-29-

Table of Contents