Gigabyte GA-P35C-DS3 User Manual page 92

B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Intel ICH9R SATA Controllers:
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select Load Driver. (Figure 8).
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 9).
GA-P35C-DS3R/DS3/S3 Motherboard
Figure 8
Figure 9
- 92 -