Gigabyte GA-P35C-DS3 User Manual page 11

Storage Interface
USB
Internal Connectors
Back Panel
Connectors
I/O Controller
Only for GA-P35C-DS3R.
Only for GA-P35C-DS3.
Only for GA-P35C-S3.
GIGABYTE SATA2 chip :
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1), supporting up to
2 SATA 3Gb/s devices)
- Support for SATA RAID 0, RAID 1, and JBOD
JMicron 368 chip :
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
Integrated in the South Bridge
Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x floppy disk drive connector
1 x IDE connector
8 x SATA 3Gb/s connectors
4 x SATA 3Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
1 x front panel audio header
1 x CD In connector
1 x S/PDIF In header
1 x S/PDIF Out header
2 x USB 2.0/1.1 headers
1 x parallel port header
1 x serial port header
1 x power LED header
1 x Chassis Intrusion header
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x coaxial S/PDIF Out connector
1 x optical S/PDIF Out connector
8 x USB 2.0/1.1 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side
Speaker Out/Line In/Line Out/Microphone)
iTE IT8718 chip
- 11 - Hardware Installation