Gigabyte GA-P35C-DS3 User Manual page 26

8) SATAII0/1/4/5 (SATA 3Gb/s Connectors, Controlled by ICH9, Orange)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device.
9) GSATAII0/1 (SATA 3Gb/s Connectors, Controlled by GIGABYTE SATA2, Purple)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device. The GIGABYTE SATA2 controller
supports RAID 0 and RAID 1. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions
on configuring a RAID array.
A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard
drives are to be used, the total number of hard drives must be an even number.
Only for GA-P35C-DS3R.
Only for GA-P35C-DS3.
Only for GA-P35C-S3.
GA-P35C-DS3R/DS3/S3 Motherboard
SATAII0
7 1
Pin No.
1 7
SATAII1
SATAII4
7 1
1 7
SATAII5
GSATAII0 Pin No.
7 1
1 7
GSATAII1
Please connect the L-shaped end
of the SATA 3Gb/s cable to your
SATA hard drive.
- 26 -
Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND