Gigabyte GA-P35-DQ6 User Manual page 96

With DTS enabled, the system will transform two-channel stereo source material into multi-channel
audio output, creating a virtual surround sound environment
1. : This button provides you more controls over "dts NEO:PC".
Music Mode ;
2. "dts NEO : PC" :
Press this button to enable or disable the dts NEO : PC function.
Enabling dts NEO : PC allows the system to transform ordinary 2-channel stereo content into 4-,
6-, or 8- channel surround sound, depending on your speaker configurations.
3. "dts INTERACTIVE" :
If your surround sound system is connected via an external decoder, click the Audio I/O tab in the
Audio Control Panel. Either click DTS Interactive in the upper left list or click the dts INTERAC-
TIVE button at the center bottom of the Audio
Control Panel. And click the dts NEO : PC
button. The system will then simulate 5.1 chan-
nel surround sound playback from two-chan-
nel content.
(Note) When DTS Interactive is enabled, only digital auio output (S/PDIF) is working, and you will
not hear sound from analog speaker or headphone.
GA-P35-DQ6 Motherboard
Enabling the DTS (Digital Theater Systems) function
Before DTS is enabled, you would get only 2-channel output signals (from the
front speakers) when playing 2-channel music. You must play 4-, 5.1-, or
7.1- channel music sources to produce 4-, 5.1-, or 7.1- channel audio effects.
After installing the audio driver, at the center bottom of the Audio Control
Panel, you should find the DTS control button as shown below:
Cinema Mode
- 96 -
(Note) .
DTS control button