Gigabyte GA-P35-DQ6 User Manual page 79

Step 5:
Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin
creating the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm
or <N> to cancel (Figure 6).
Intel(R) Matrix Storage Manager option ROM v7.5.0.1014 ICH9R wRAID5
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
[ ]-Change
When completed, you can see detailed information about the RAID array in the DISK/VOLUME
INFORMATION section, including the RAID level, stripe block size, array name, and array capacity,
etc. (Figure 7)
Intel(R) Matrix Storage Manager option ROM v7.5.0.1014 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes :
ID Name
0 Volume0
Physical Disks :
Port Drive Model
0 ST3120026AS
1 ST3120026AS
[ ]-Select
To exit the ICH9R RAID BIOS utility, press <Esc> or select Exit in MAIN MENU.
Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA
RAID/ACHI driver and operating system.
Copyright(C) 2003-07 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.6 GB
Create Volume
[ HELP ]
Are you sure you want to create this volume? (Y/N) :
Press ENTER to create the specified volume.
[TAB]-Next [ESC]-Previous Menu
Figure 6
Copyright(C) 2003-07 Intel Corporation. All Rights Reversed.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
Level
RAID0(Stripe)
Serial #
3JT354CP
3JT329JX
[ESC]-Exit
Figure 7
- 79 -
3. Reset Disks to Non-RAID
4. Exit
Strip Size Status
128KB 223.6GB Normal
Size Type/Status(Vol ID)
111.8GB Member Disk(0)
111.8GB Member Disk(0)
[ENTER]-Select Menu
[ENTER]-Select
Bootable
Yes
Appendix