Integrated Peripherals - Gigabyte GA-M57SLI-S4 User Manual

2-3

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Serial-ATA RAID Config
On-Chip IDE Channel0
On-Chip MAC Lan
NV Serial-ATA Controller
IDE Prefetch Mode
Onboard Audio Function
SMART LAN
Onboard 1394
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
On-Chip USB
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
: Move Enter: Select
F5: Previous Values
Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
NV SATA RAID function
x NV SATA 1 Primary RAID
x NV SATA 1 Secondary RAID
x NV SATA 2 Primary RAID
x NV SATA 2 Secondary RAID
x NV SATA 3 Primary RAID
x NV SATA 3 Secondary RAID
: Move Enter: Select
F5: Previous Values
NV SATA RAID function
Enabled Allows users to configure individual SATA channels as RAID or ATA mode.
Disabled Disable the RAID function for all of the onboard SATA channels. (Default value)
NV SATA 1 Primary RAID
Enabled Enable RAID function for the first channel of the first SATA controller. (Default value)
Disabled Disable the RAID function of this channel. It will operate in ATA mode.
NV SATA 1 Secondary RAID
Enabled Enable RAID function for the second channel of the first SATA controller. (Default value)
Disabled Disable the RAID function of this channel. It will operate in ATA mode.
NV SATA 2 Primary RAID
Enabled Enable RAID function for the first channel of the second SATA controller. (Default value)
Disabled Disable the RAID function of this channel. It will operate in ATA mode.
GA-M57SLI-S4 Motherboard
Integrated Peripherals
[Press Enter]
[Enabled]
[Auto]
[All Enabled]
[Enabled]
[Auto]
[Press Enter]
[Enabled]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
[V1.1+V2.0]
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Serial-ATA RAID Config
[Disabled]
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 40 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults