Resume By Alarm - Gigabyte GA-K8N Pro User Manual

PME Event Wake Up
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state.
This feature requires an ATX power supply that provides at least 1A on the 5VSB
lead.
Disabled
Enabled
Modem Ring On
You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake
up".
An incoming call via modem awakes the system from its soft-off mode.
Disabled
Enabled
S3 Resume by USB Device
You can resume the system from USB device.
Disabled
Enabled

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Enabled
K8n pro_1001_b.p65
Disable this function.
Enable PME Event Wake up. (Default Value)
Disable Modem Ring on function.
Enable Modem Ring on . (Default Value)
Disable this function. (Default Value)
Enable this function.
Disable this function. (Default Value)
Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Day of Month Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
- 53 -
53
BIOS Setup
2003/8/18, ¤U¤È 06:08