Gigabyte GA-K8N Pro User Manual page 28

9) IDE3 / IDE4 (RAID/ATA133, Green Connector)
Important Notice: The red stripe of the ribbon cable must be the same side with the Pin1. If you wish
to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133). Then, install the
correct driver to have proper operation. For details, please refer to the GigaRAID manual.
10) SATA0_SII / SATA1_SII (Serial ATA Connector)
You can connect the Serial ATA device to this connector, it provides you high speed transfer rates
(150MB/sec). If you wish to use RAID function, please use it in unity with BIOS and install the
correct driver to have proper operation. For details, please refer to the SATA RAID manual.
Silicon Image Sil3512 chip supports Serial ATA
connectors hot plug function.
GA-K8N Pro Motherboard
K8n pro_1001_q.p65
39
40
7
SATA0_SII
Pin No.
1
2
3
4
5
6
7
- 28 -
28
1
2
7 1
1
SATA1_SII
Definition
GND
TXP
TXN
GND
RXN
RXP
GND
2003/8/18, ¤U¤È 06:06
IDE4
IDE3