Gigabyte GA-K8N Pro User Manual page 31

14) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only when AC power cord is
disconnected.
15) 2X_DET
When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non-supported
graphics card is inserted. Informing users that system might not boot up normally due to AGP 2X
(3.3V) is not supported by the chipset.
K8n pro_1001_q.p65
+
- 31 -
31
_
+
_
Hardware Installation Process
2003/8/18, ¤U¤È 06:06