Standard Cmos Features - Gigabyte GA-EQ45M-S2 User Manual

2-4

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 2 Master
 IDE Channel 3 Master
 IDE Channel 4 Master
 IDE Channel 4 Slave
 IDE Channel 6 Master
 IDE Channel 6 Slave
Drive A
Floppy 3 Mode Support
Halt On
: Move
Enter: Select
F5: Previous Values
Base Memory
Extended Memory
Total Memory
: Move
Enter: Select
F5: Previous Values
Date
Sets the system date. The date format is week (read-only), month, date and year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
GA-EQ45M-S2 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Fri, Jan 16 2009
17:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
F10: Save
640K
510M
512M
F10: Save
- 40 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults