Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-EQ45M-S2 User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster
CPU Clock Ratio
Fine CPU Clock Ratio
CPU Frequency
******** Clock Chip Control ********
Spread Spectrum
******** Standard Timing Control
(G)MCH Frequency Latch
System Memory Multiplier
Memory Frequency (Mhz)
DRAM Timing Selectable
x CAS Latency Time
x tRCD
x tRP
x tRAS
 Advanced Timing Control
: Move
Enter: Select
F5: Previous Values
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter-
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and
memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system
configurations. Options are: Auto (default), Fast, Turbo.
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
Fine CPU Clock Ratio
Allows you to increase the CPU clock ratio set in the CPU Clock Ratio item above by 0.5.
CPU Frequency
Displays the current operating CPU frequency.
Clock Chip Control
********
Spread Spectrum
Enables or disables the Spread Spectrum technology. Enabled may reduce electromagnetic
interference and effectively lower electromagnetic radiation. (Default: Enabled)
(Note) This item appears only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note)
(Note)
********
(SPD)
800
(SPD)
5
5
5
15
+/-/PU/PD: Value
F6: Fail-Safe Defaults
(Note)
(Note)
********
[Auto]
[10 X]
[+0.5]
2.66GHz( 266x10)
[Enabled]
[Auto]
Auto
800
[Auto]
Auto
Auto
Auto
Auto
[Press Enter]
F10: Save
- 37 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup