Pc Health Status - Gigabyte GA-EP45-EXTREME User Manual

2-9

PC Health Status

Reset Case Open Status
Case Opened
Vcore
DDR18V
+5V
Current System Temperature
Current CPU Temperature
Current MCH Temperature
Current CPU FAN Speed
Current SYSTEM FAN2 Speed
Current POWER FAN Speed
Current SYSTEM FAN1 Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN2 Fail Warning
POWER FAN Fail Warning
SYSTEM FAN1 Fail Warning
CPU Smart FAN Control
CPU Smart FAN Mode
: Move Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of
previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default:
Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard
CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will
show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled,
save the settings to CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR18V/+5V
Displays the current system voltages.
Current System/CPU/MCH Temperature
Displays current system/CPU/North Bridge temperature.
Current CPU/SYSTEM/POWER FAN Speed (RPM)
Displays current CPU/system/power fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
176 F, 90 C/194
o o
CPU/SYSTEM/POWER FAN Fail Warning
Allows the system to emit warning sound if the CPU/system/power fan is not connected or fails.
Check the fan condition or fan connection when this occurs. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F.
o
PC Health Status
[Disabled]
No
1.332V
1.840V
4.999V
o
30 C
o
47 C
42 o C
3375 RPM
0 RPM
0 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
F10: Save
- 59 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
C/140 F, 70 C/158
o o o
F, 80 C/
o o
BIOS Setup