Enabling Teaming Functionality In Windows Vista - Gigabyte GA-EP45-EXTREME User Manual

B. Enabling Teaming Functionality in Windows Vista:
Select Realtek Ethernet Teaming Utility and
click Install.
Step 1:
Insert the motherboard driver disk and select Appli-
cation Software, Install Application Software.
Click Install under Realtek Ethernet Teaming Util-
ity for installation. Restart your system when completed.
Step 3:
Select the two adapters and set up the Teaming
mode based on your hub's specifications. Then
click the Teaming button. (Two dialog boxes
will appear during the setup process, click OK to
continue). When the Create Virtual Adapter
For Teaming Complete dialog box appears,
click OK to complete.
Step 5:
Click View status in Network and Sharing
Center and you will see the connection speed is
2.0 Gbps.
GA-EP45-EXTREME Motherboard
Step 2:
Click the Start icon
Realtek Teaming and VLAN, Realtek Teaming
and VLAN Utility to access the utility.
Step 4:
After the Teaming is created, you will see only
one connection in Network and Sharing Center.
Removing the Existing Teaming:
If you want to remove the existing Teaming,
access the Realtek Vlan & Teaming Utility
and click the Remove button.
- 84 -
. Point to All Programs,