Frequency/Voltage Control - Gigabyte GA-945GCM-S2 User Manual

2-7

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
CPU Clock Ratio (Note)
O.C FSB1333 Core. 2 CPU1
CPU Host Clock Control
x CPU Host Frequency(Mhz)
x PCI Express Frequency
System Memory Multiplier
Memory Frequency (Mhz)
DIMM OverVoltage Control1
FSB OverVoltage Control1
CPU Voltage Control1
Normal CPU Vcore1
: Move Enter: Select
F5: Previous Values
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the menu items are for power users only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
O.C FSB1333 Core 2 CPU
Enable use of a Core
FSB 1333 MHz Core
Disabled Disable this function. (Default value)
Enabled Enable this function.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100 ~ 600 Set CPU Host Frequency from 100 MHz to 600 MHz.
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use a 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
If you use a 1066 MHz FSB processor, set "CPU Host Frequency" to 266 MHz.
If you use a 1333 MHz FSB processor, set "CPU Host Frequency" to 333 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
(Note) This item will show up when you install a processor which supports this function.
Only for GA-945GCMX-S2.
Frequency/Voltage Control
[18X]
[Disabled]
[Disabled]
200
Auto
[Auto]
667
[Normal]
[Normal]
[Normal]
1.30000V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
2 CPU with 1333 MHz FSB through overclocking. You must install the
TM
2 CPU with DDR2 533 (or above) memory module(s).
TM
- 47 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup