Frequency/Voltage Control - Gigabyte GA-8SIMLP User Manual

Frequency/Voltage Control

CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are
CPU Clock Ratio
Linear Frequency Control
x CPU Clock
x DRAM Clock (MHz)
x AGP Clock (MHz)
x PCI Clock (MHz)
higf: Mov e
Enter:Select +/-/PU/PD:Value F10:Sav e
F5:Prev ious Values
C CPU Clock Ratio
This option w ill not be show n or not be av ailable if y ou are using a CPU w ith the locked ratio.
810X~24X
C Linear Frequency Control
8Disabled
8Enabled
C CPU Clock
8100~355
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
C DRAM Clock (MHz)
8Please set DRAM Clock according to y our requirement.
If y ou use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 200. If y ou use DDR333
DRAM module, please set "DRAM Clock(MHz)" to 333.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
GA-8SIMLP Motherboard
Frequency /Voltage Control
F6:Fail-Safe Defaults
Figure 8: Frequency /Voltage Control
It' s depends on CPU Clock Ratio.
Disable this function. (Default v alue)
Enable this function.
Select CPU Clock to 100MHz~355MHz.
- 40 -
10X Item Help
Disabled Menu Lev el u
100
AUTO
AUTO
AUTO
ESC:Ex it F1:General Help
F7:Optimized Defaults