Gigabyte GA-8SIMLP User Manual page 21

E) IDE1/ IDE2 [IDE1 / IDE2 Connector(Primary/Secondary)]
1
N) F_AUDIO (Front Audio Connector)
Front Audio (R)
Reserved
Front Audio (L)
ØIf you want t o use "Front Audio" connector, you must remove 5-6, 9-10 Jumper. In order t o utilize the
front audio header, your chassis must have front audio connector. Also please make sure the pin
assigment on the cable is the same as the pin assi g ment on the MB header. To find out if the chassis
you are buying support front audio connector, please contact your dealer.
O) CD_IN (CD Audio Line In)
CD-R
1 CD-L
Ø Important Notice:
1
1
MIC
REF
9
P) AUX_IN ( AUX In Connector)
GND
- 17 -
Please connect first harddisk to IDE1
and connect CDROM to IDE2.
2
GND
POWER
Rear Audio (R)
Rear Audio (L)
10
AUX-R
GND
1 AUX-L
Hardw are Installation Process