Gigabyte GA-8IPE775 Series User Manual page 67

Using the Q-Flash utility:
TM
This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin"
section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to
your computer. If you have already put the floppy disk into your system and have entered the Q-Flash
utility, please follow the steps below to flash BIOS.
Steps:
1. Press arrow buttons on your keyboard to move the light bar to "Update BIOS from Floppy" item in the
Q-Flash menu and press Enter button.
Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.
If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save BIOS
to Floppy" item.
2. Move to the BIOS file you want to flash and press Enter.
In this example, we only download one BIOS file to the floppy disk so only one BIOS file,
8GE800.F4, is listed.
Please confirm again you have the correct BIOS file for your motherboard.
Flash Type/Size..............................
8GE800.F4
Enter : Run
Total size: 1.39M
F5 : Refresh
Flash Type/Size..............................
Reading BIOS file from floppy...
>>>>>>>>>>>>......................
Don't Turn Off Power Or Reset System
Enter : Run
After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"
Please do not take out the floppy disk when it begins flashing BIOS.
Q-Flash Utility V1.30
SST 49LF003A
Keep DMI Data Enable
Update BIOS from Floppy
1 file(s) found
Save BIOS to Floppy
:Move ESC:Reset
Free size:1.14M
Q-Flash Utility V1.30
SST 49LF003A
Keep DMI Data Enable
Update BIOS from Floppy
Save BIOS to Floppy
:Move ESC:Reset
- 63 -
256K
BIOS file in the floppy disk.
256K
F10:Power Off
DEL : Delete
256K
Do not trun off power or
reset your system at this
F10:Power Off
stage!!
Technical Reference