Gigabyte GA-8IPE775 Series User Manual page 25

3/4/5) CPU_FAN / SYS_FAN / PWR_FAN
The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and
possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is
the ground wire (GND).
Please remember to connect the power to the cooler to prevent system overheating and failure.
Caution!
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.
6) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Important Notice:
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
Only for GA-8IPE775 Pro.
(Cooler Fan Power Connector)
1
CPU_FAN
1
SYS_FAN
1
PWR_FAN
40
2
IDE2 IDE1
- 21 - Hardware Installation Process
Pin No. Definition
1 GND
2 +12V
3 Sense
4 Control
(Only for CPU_FAN)
39
1