Usb Controller; Usb Keyboard Support - Gigabyte GA-8IPE775 Series User Manual

On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip Secondary PCI IDE
Enabled
Disabled
On-chip SATA
Disabled
Auto
Manual
SATA Port0 Configure as
IDE Pri. Master
IDE Pri. Slave
IDE Sec. Master
IDE Sec. Slave
SATA Port0
SATA Port1
SATA Port1 Configure as
The values depend on SATA Port0.

USB Controller

Enabled
Disabled
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled

USB Keyboard Support

Enabled
Disabled
GA-8IPE775 Series Motherboard
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default value)
Disable onboard 2nd channel IDE port.
Disable SATA controller.
When there is no device to be plugged in IDE1 or IDE2, SATA controller
will remap to IDE controller. (Default value)
Set SATA Mode manually.
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slave.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slave.
SATA controller set to SATA port0. As this mode, it support by WinXP or
later OS only. (Default value)
SATA controller set to SATA port1. As this mode, it support by WinXP or
later OS only.
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
Enable USB Keyboard Support.
Disable USB Keyboard Support. (Default value)
- 40 -