Gigabyte 8I845GE-RZ User Manual page 24

Drive A / Drive B
The category identifies the types of floppy disk (drive A and drive B) installed in the computer.
None
360K, 5.25"
1.2M, 5.25"
720K, 3.5"
1.44M, 3.5"
2.88M, 3.5"
Floppy 3 Mode Support (for Japan Area)
Disabled
Drive A
Drive B
Both
Halt on
The category determines whether the computer will stop if an error is detected during power up.
All Errors
No Errors
All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other
All, But Diskette
All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all
Memory
The category is display-only which is determ ined by POST (Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) m emory installed
in the system.
The value of the base m em ory is typically 512K for systems with 512K m em ory installed on
the motherboard, or 640K for systems with 640K or m ore memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the am ount of mem ory located above 1 M B in the CPU's memory address map.
Total Memory
This item displays the memory size that used.
8I845GE-RZ Series Motherboard
No floppy disk is installed
5.25 inch PC-type standard drive; 360K byte capacity.
5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 M ode is Enabled).
3.5 inch double-sided drive; 720K byte capacity
3.5 inch double-sided drive; 1.44M byte capacity.
3.5 inch double-sided drive; 2.88M byte capacity.
Normal Floppy Drive. (Default value)
Enable Drive A 3 Mode support.
Enable Drive B 3 Mode support.
Enable both Drive A and B 3 M ode support.
Whenever the BIOS detects a non-fatal error the system will stop.
The system boot will not stop for any error that m ay be detected and you
will be prompted.
errors. (Default value)
The system boot will not stop for a disk error; it will stop for all other errors.
other errors.
- 24 -