Ricoh P7575 Operating Instructions Manual page 302

Making Printer Settings Using the Control Panel
• 256 KB
• 512 KB
❒ Default: 128 KB
❖ I/O Timeout
You can set how many seconds the printer should wait before ending a print
job. If printing operation is frequently interrupted by data from other ports, you
can increase the timeout period.
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds
❒ Default: 15 seconds
❖ Network Setup
You can make network-related settings.
For details, see "Configuration", Printer Reference.
❖ DHCP
You can select [On] or [Off] to use DHCP with TCP/IP.
• On
• Off
❒ Default: On
❖ IP Address
You can specify the IP address.
❒ When DHCP is set to on, the IP address cannot be changed. To change
it, set DHCP to off. Contact your network administrator for information
about the network configuration.
❒ Default: 000.000.000.000
❖ Subnet Mask
You can specify the subnet mask.
159