Gateway GTW-P42M102 User Manual page 90

Appendix A: Safety, Regulatory, and Legal Information
Setting up your system
■ Read and follow all instructions marked on the product and in the documentation before you
operate your system. Retain all safety and operating instructions for future use.
■ Do not use this product near water or a heat source such as a radiator.
■ Set up the system on a stable work surface.
The product should only be operated from the type of power source indicated on the rating label.
■
■ If your product has a voltage selector switch, make sure that the switch is in the proper position
for your area. The voltage selector switch is set at the factory to the correct voltage.
■ Openings in the plasma TV case are provided for ventilation. Do not block or cover these
openings. Make sure that you provide adequate ventilation space, at least 6 inches (15.2 cm)
around the system for when you set up your work area or 3 inches (7.6 cm) behind the system
when using the Gateway plasma TV wall mount. Never insert objects of any kind into the plasma
TV ventilation openings.
■ Some products are equipped with a three-wire power cord to make sure that the product is
properly grounded when in use. The plug on this cord will only fit into a grounding-type outlet.
This is a safety feature. If you are unable to insert the plug into an outlet, contact an electrician
to install the appropriate outlet.
If you use an extension cord with this system, make sure that the total ampere rating on the
■
products plugged into the extension cord does not exceed the extension cord ampere rating.
■ If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and buildup of static charges.
86 www.gateway.com