Local Port - TRENDnet TW100-S4W1CA User Manual

Figure 7
Adapter Address: This field is grayed out, because the Adapter Address is not supposed to
be entered randomly. Do Not alter the content unless you are sure it is necessary to modify
your MAC address. To modify the address, check Modify and enter the desired MAC
address.
Device/Computer Name: Enter a descriptive name for identification purpose. Some Internet
Service Providers (ISP) requires this information and if that is the case, they will provide you
with the name.
Domain Name: For example: yourcompany.com. The maximum input for this field is 32
alphanumeric characters and it is case insensitive.
IP Config ?Dynamic ?Static This line is grayed out for static configuration.
IP Address: Enter the information provided by your ISP.
Subnet Mask: Enter the information provided by your ISP.
Gateway: Enter the information provided by your ISP.
DNS Server ?Dynamic ?Static This line is grayed out for static configuration.
Primary/Secondary: Enter the information provided by your ISP.
SAVE: After completing the settings on this page, click SAVE to save the settings.
RESET: Click RESET to clear all the settings on this page.

Local Port

This screen contains settings for LAN interface attached to the local network. You can set to
distribute IP address to local PCs or not. If "Distribute IP address to local computer" is
selected, users can enter the IP addresses assigned for the computers on LAN. The number of
- 12 -