TP-Link TD-W8151N User Manual page 35

TD-W8151N
5) WPA-PSK/WPA2-PSK
To configure WPA-PSK/WPA2-PSK settings, select the WPA-PSK/WPA2-PSK option from the
drop-down list. The menu will change to offer the appropriate settings. WPA-PSK/WPA2-PSK
requires a shared key and does not use a separate server for authentication. PSK keys can be
ASCII or Hex type.
QSS Settings: QSS can help you to add a new wireless device to an existing network quickly.
This section will guide you how to use QSS function.
•
QSS state: Display the current QSS state.
•
QSS mode: If the wireless adapter supports Wi-Fi Protected Setup (QSS), you can
establish a wireless connection between wireless adapter and Router using either Push
Button Configuration (PBC) method or PIN method, please select the one you want.
•
QSS progress: Show the current QSS progress.
•
Reset to OOB: Use this button to reset the QSS state to "unconfigured", so that a new
key will be created when using QSS function next time.
1) PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods. Click
PBC, you will see the screen as shown below.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-17
Figure 4-18
28