TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
2.2 The Back Panel
Figure 2-2
POWER: The Power plug is where you will connect the power adapter.
ON/OFF: The power switch for the Router.
RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
LAN: Through the port, you can connect the Router to your PC or the other Ethernet network
devices.
LINE: Through the port, you can connect the Router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to
"2.4 Connecting the
Router".
Antenna: Used for wireless operation and data transmit.
5