TP-Link TD-W8151N User Manual page 34

TD-W8151N
2) WEP-128Bits
To configure WPA-128Bits settings, select the WPA-128Bits option from the drop-down list. The
menu will change to offer the appropriate settings. 128-bit is stronger than 64-bit.
3) WPA-PSK
To configure WPA-PSK settings, select the WPA-PSK option from the drop-down list. The menu
will change to offer the appropriate settings. WPA-PSK requires a shared key and does not use a
separate server for authentication. PSK keys can be ASCII or Hex type.
Encryption: Select the encryption you want to use: TKIP or AES (AES is an encryption
method stronger than TKIP).
•
TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides
dynamic encryption keys for each packet transmitted.
•
AES (Advanced Encryption Standard) - A security method that uses symmetric 128-bit
block data encryption.
Pre-Shared Key: Enter the key shared by the Router and your other network devices. It must
have 8-63 ASCII characters or 64 Hexadecimal characters.
4) WPA2-PSK
To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu
will change to offer the appropriate settings. WPA2-PSK requires a shared key and does not use a
separate server for authentication. PSK keys can be ASCII or Hex type.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-15
Figure 4-16
27