Proxy And Registration Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

User guide
Hide thumbs Also See for RTP300 - Broadband Router With 2 Phone Ports:
Table of Contents

Advertisement

Voice tab > PSTN Line page >

Proxy and Registration section

Field
Description
Proxy
SIP proxy server for all outbound requests.
Use Outbound Proxy
Enable the use of Outbound Proxy. If set to no, the Outbound Proxy parameter
and Use OB Proxy in Dialog is ignored.
The default is no.
Outbound Proxy
SIP Outbound Proxy Server where all outbound requests are sent as the first
hop.
Use OB Proxy In Dialog
Whether to force SIP requests to be sent to the outbound proxy within a
dialog. Ignored if the Use Outbound Proxy parameter is no, or if the Outbound
Proxy parameter is empty.
The default is yes.
Register
Enable periodic registration with the Proxy. This parameter is ignored if the
Proxy parameter is not specified.
The default is yes.
Make Call Without Reg
Allow making outbound calls without successful (dynamic) registration by
the unit. If No, dial tone will not play unless registration is successful.
The default is no.
Register Expires
Allow answering inbound calls without successful (dynamic) registration by
the unit. If proxy responded to REGISTER with a smaller Expires value, the
PAP2T will renew registration based on this smaller value instead of the
configured value. If registration failed with an Expires too brief error
response, the PAP2T will retry with the value given in the Min-Expires header
in the error response.
The default is 3600.
Ans Call Without Reg
Expires value in sec in a REGISTER request. PAP2T will periodically renew
registration shortly before the current registration expired. This parameter is
ignored if the Register parameter is no. Range: 0 – (231 – 1) sec
Use DNS SRV
Whether to use DNS SRV lookup for Proxy and Outbound Proxy.
The default is no.
DNS SRV Auto Prefix
If enabled, the PAP2T will automatically prepend the Proxy or Outbound
Proxy name with _sip._udp when performing a DNS SRV lookup on that
name.
The default is no.
Linksys ATA Administration Guide
PSTN Line page (AG310 and SPA3102)
145

Advertisement

Table of Contents
loading

Table of Contents